Chimney Company in SoMa - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 620-7061

Flat price quoted before we book

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Chimney Company in SoMa, CA | Chimney Sweep Alamo Square
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in SoMa, CA

Chimney repair in SoMa means something different than it does almost anywhere else in San Francisco. Most of the flues we work on here run through converted warehouses, old industrial buildings, and mixed-use lofts rather than single-family homes. That means shared systems, rooftop access, original brick from the early 1900s, and repair logic that starts with tracing where a flue actually begins and ends. Chimney Sweep Alamo Square has served SoMa since 2011. Call (833) 620-7061 when you need a straight answer about what’s happening inside your flue.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 620-7061

Why SoMa Homes Are Different

SoMa’s building stock defines the work. The housing here is dominated by converted early-1900s warehouses and light-industrial buildings turned residential lofts, plus mid-rise apartment and mixed-use infill. Flues are commonly masonry and original brick from the industrial era, often shared between units or repurposed from their original commercial function. Access is typically through roof hatches or freight elevators rather than through a home’s interior. That changes the inspection process: we’re not walking up to a fireplace and looking up. We’re on a rooftop, tracing a flue run down through a building to wherever it now terminates.

The climate matters too, but not the way it does in wood-burning suburbs. SoMa’s bay-moderate weather means fires are occasional and recreational. The bigger issue is marine fog and damp air, which accelerate masonry spalling and creosote moisture problems. Brick absorbs moisture, and decades of fog cycles do real damage to mortar joints and crowns. Waterproofing and inspection work often matters more here than heavy seasonal sweeping. If you own or manage a SoMa loft, understanding that distinction saves you money and prevents surprises.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main SoMa Services

Two services dominate the calls we get from SoMa residents and property managers: chimney sweeping for the flues that still serve working fireplaces or appliances, and dryer vent cleaning for the exhaust runs that most converted buildings never properly addressed.

Chimney Sweep in SoMa

Chimney sweeping in SoMa often means commercial-grade flue work more than traditional fireplace cleaning. Many of the flues we service here originally vented heating plants, restaurant kitchens, or industrial processes. Before we sweep anything, we trace the entire run from roof vent to its current termination point, because in converted lofts the bottom of the flue isn’t always where you’d expect. Damp air and decades of repurposed masonry mean we’re watching for creosote moisture problems and structural issues alongside routine buildup. For full detail on how sweeping works in SoMa’s building stock, see Chimney Sweep in SoMa.

Dryer Vent Cleaning in SoMa

Dryer vents in SoMa’s converted buildings are frequently long, concealed, and routed through shared walls or plenums. That’s a combination that makes routine cleaning a genuine fire-safety issue, not a chore you can put off. Lint accumulates faster in humid marine air, and restricted exhaust pushes your dryer harder while trapping heat where you can’t see it. We see this in lofts and mid-rise buildings throughout the 94104 area. The good news is it’s a straightforward fix when caught early. For SoMa-specific dry vent work, see Dryer Vent Cleaning in SoMa.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 620-7061

Chimney Repair in SoMa

Chimney repair in SoMa deals with brick that has spent a century absorbing bay moisture, mortar joints that have spalled away, and flue systems that were never designed for the residential use they now serve. Chimney Repair work in this district starts with accurate diagnosis, because in converted industrial buildings the visible problem at the rooftop is often only a symptom of trouble further down the flue run.

Chimney Flashing Repair

Signs you need it

Water staining on ceilings or walls near the roofline, visible gaps where the flashing meets brick, or rusted metal around the flue base.

What it costs in SoMa

Chimney flashing repair in SoMa typically runs $250 to $700 depending on access difficulty and whether we’re patching or replacing the full flashing assembly.

How we do it

We remove failed flashing, inspect the underlying brick and mortar for damage, then install new flashing with proper step-and-counterflashing technique so water sheds away from the flue instead of into it.

Chimney Crown Repair

Signs you need it

Cracks in the concrete crown, pieces of crown material on the roof, or efflorescence staining running down the brick below the crown.

What it costs in SoMa

Crown repair in SoMa typically runs $400 to $1,200, with full crown replacement toward the upper end if the existing crown has failed structurally.

How we do it

We assess whether the crown needs patching or full replacement, then pour or trowel a properly sloped crown with a drip edge that moves water away from the flue walls.

What Chimney Repair Costs in SoMa

Item Typical range in SoMa
Chimney Flashing Repair $250 – $700
Chimney Crown Repair $400 – $1,200
Chimney Liner Installation $2,500 – $6,000

Can you fix a SoMa chimney without replacing the whole flue?

Yes. Many SoMa chimneys need targeted repair, not full relining. We use HeatShield resurfacing for joint sealing and minor liner damage, a system that restores the existing flue rather than tearing it out. Full relining with DuraFlex is reserved for cases where the liner has genuinely failed or never existed.

How do you access chimneys in converted SoMa warehouses?

Through roof hatches, freight elevators, and shared rooftop systems. We coordinate with building management where needed, and we’ll tell you exactly what access we need before scheduling so you’re not surprised on the work day. Call (833) 620-7061 for specifics about your building.

Brands We Service in SoMa

We work with HeatShield for liner resurfacing, DuraFlex for full relining projects, and Gelco for chimney caps and weatherproofing components. These are professional-specification materials sourced through trade channels like Olympia Chimney and Copperfield, not hardware-store substitutes. Our brands page breaks down what each system does and when we recommend it. In most SoMa repair jobs, we stock the common components and can start work without a return trip.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 620-7061

Pricing for Chimney Company in SoMa, CA

Service Typical range in SoMa
Chimney Flashing Repair $250 – $700
Chimney Crown Repair $400 – $1,200
Chimney Liner Installation $2,500 – $6,000
Chimney Cap Installation $180 – $450
Chimney Cap Replacement $250 – $550
Chimney Sweep (standard) $180 – $350
Dryer Vent Cleaning $150 – $300
Level 2 Chimney Inspection $250 – $500

In SoMa, access is the biggest price variable. Rooftop work on a six-story converted warehouse with a single roof hatch takes longer to set up than a walk-up residential chase. You’ll get an upfront price before we book, and nothing changes without a conversation first.

Neighborhoods We Serve in SoMa

We work throughout SoMa’s residential and mixed-use pockets, from the loft-heavy blocks near South Park to the converted industrial corridors and new infill buildings. SoMa’s varied building stock means we’re as likely to be servicing a shared flue in a mid-rise as a surviving fireplace in an original brick loft.

  • South Park
  • Yerba Buena
  • Rincon Hill
  • Mission Bay
  • East SoMa

For most SoMa properties, we can schedule within a week, and we coordinate access through building management or HOA contacts when that’s required.

Service Area – Cities Near SoMa

Beyond SoMa, our service area covers the surrounding San Francisco districts. We work regularly in Nob Hill, CA, Civic Center, CA, Marina District, CA, and Pacific Heights, CA. Each area has its own housing patterns and flue access realities, and we’ll give you a straight answer about scheduling wherever your building is.

Serving SoMa, CA – Our Local Coverage Area

We’re based in the SoMa area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.

FAQs About Chimney Company in SoMa

Ready to get started? Free estimates in SoMa
Call (833) 620-7061

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What SoMa Customers Say

★★★★★ 4.8 from 8+ reviews

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Brianna Coleman

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Shane Brooks

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Steven Park

How It Works in SoMa

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in SoMa. We'll get back to you fast. No obligation.

When you send us your details, you agree to our Privacy Policy and consent to receive communications through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7